Uses: 

Suitable for fibro, concrete tile and galvanised iron roofs. 

Colour: Range of popular traditional and modern tile colours available. 

Gloss Level: Gloss or Semi-Gloss 

Durability: Excellent 

Solvent Resistant: Sensitive to aromatic hydrocarbons and alcohol's. 

Toxicity: Lead free. 

Coverage: Assumes no losses. Two coats are recommended each with a coverage of 10 sqm per litre at a recommended 40 micrometres dry film build. 

Volume Solids: 40% 

Drying Time: Touch dry in 30 minutes, re-coat after two hours. In damp and humid conditions drying time is lengthened. 

Surface Preparation: Surface to be painted should be dry and free from dust, grease and dirt. Remove flaking, powdery paint and repair surface imperfections with Roof Top Filler coat. Roofs should be thoroughly scrubbed with hot water or water blasted. If fungal growth is present the roof should be first treated with Roof Top Mildew remover. Fibro roofs should be diluted with 10 to 20% water. Galvanised iron should be first primed with Roof Top Galvanised Iron Primer. 

Application: By brush, roller or spray. Thin up to 100ml per litre with water to aid application. 

Equipment Clean Up: Water.

The information presented in this data sheet does not imply any warranty. Further, the maker reserves the right to alter the product, the specification and/or the application techniques as described herein without prior notice, in line with his policy of technological advancement and product improvement. Whilst any information and/or specification contained herein is to the best of our knowledge, true and accurate, no warranty is given or implied in connection with any recommendations or suggestions made by us or our Representatives, Agents or Distributors as conditions of use and any labour involved are beyond our control.