DESCRIPTION:

2 PACK GUARDSEAL; A two component solvent based urethane / acrylic polymer coating which has been specifically formulated for the use as an inexpensive, durable and easy to use to apply clear protective 2 Pack Floor Coating, to prevent the deep penetration of markings over applied finishes.

ADVANTAGES:

* Clear non-yellowing. Hard wearing.
* One step, ease of application, no waste.
* Can be applied over existing finishes.
* Increased weather protection.
* Excellent UV resistance.
* Water, chemical and alkali resistance.

APPLICATION:

2 PACK GUARDSEAL, can be applied by brush, roller or spray. On porous substrates two coats are recommended. One non-porous substrates only one coat is required.

COVERAGE:

2 PACK GUARDSEAL, will cover at a rate of 10m2 per litre per coat, depending on the porosity and roughness of the surface.

PACKAGING:

2 PACK GUARDSEAL, is available in sealed units of 4ltr 10ltr and 20ltr.

CHEMICAL RESISTANCE:

TYPICAL PROPERTIES:

APPLICATION PROPERTIES:

SWARD HARDNESS:

PHYSICAL PERFORMANCE PROPERTIES:
(After 7 days curing at ambient conditions)

The information presented in this data sheet does not imply any warranty. Further, the maker reserves the right to alter the product, the specification and/or the application techniques as described herein without prior notice, in line with his policy of technological advancement and product improvement. Whilst any information and/or specification contained herein is to the best of our knowledge, true and accurate, no warranty is given or implied in connection with any recommendations or suggestions made by us or our Representatives, Agents or Distributors as conditions of use and any labour involved are beyond our control.